DTAC
The DTAC range of capacitors was designed with one aim in mind, to produce a capacitor with the lowest resistance possible.
This is achieved by winding from with a narrow polypropylene film with a special spray and heat treatment process which all contribute to the exceptional performance of this capacitor. Combined with hand soldered M8 tinned copper terminals ensure that the ESR is greatly reduced when compared to the traditional axial leaded components.
The low ESR is particularly relevant in high quality crossover networks ensuring that loudspeakers perform to their optimum.
Comparison with standard SA capacitors
Size Chart
| Cap (µF) | Typ Dia | Min Dia | Max Dia |
| 2.00 | 38 | 36 | 42 |
| 3.00 | 45 | 43 | 50 |
| 4.00 | 53 | 50 | 57 |
| 5.00 | 59 | 56 | 64 |
| 6.00 | 64 | 60 | 70 |
| 7.00 | 69 | 65 | 75 |
| 8.00 | 73 | 69 | 80 |
| 9.00 | 78 | 73 | 85 |
| 10.00 | 82 | 77 | 90 |
| 11.00 | 86 | 81 | 94 |
| 12.00 | 89 | 85 | 99 |
| 13.00 | 93 | 88 | 102 |
| 14.00 | 97 | 91 | 106 |
| 15.00 | 100 | 95 | 110 |
| 16.00 | 103 | 98 | 113 |
| 17.00 | 106 | 101 | 117 |
| 18.00 | 109 | 103 | 120 |
| 19.00 | 112 | 106 | 123 |
| 20.00 | 115 | 109 | 127 |
| 21.00 | 118 | 112 | 129 |
| 22.00 | 121 | 114 | 133 |
Dimensions are shown in mm (max). Intermediate values are available upon request.
Component Outline
Ordering Details
DTAC 5u6 J 630V
| DTAC | Type | 5u6 | Capacitance in nF/µF |
| J | Tolerance (5%) | 630V | Rated dc voltage (630Vdc) |